Adjustment Of Sensor Bracket Position - Sega UFO CATCHER Owner's Manual

13-2 ADJUSTMENT OF SENSOR BRACKET POSITION

When changing the arm size or to limit the range in which the UFO mechanism can move horizontally, change the
position of the sensor bracket. The UFO mechanism stops where the sensor bracket is located.
The sensor brackets are in a symmetrical spatial relationship with respect to 1P and 2P.
1. Loosen the wing screw and move the sensor bracket HP (Home Position) to the location indicated by the sticker.
13
40
WING SCREW
When attaching arm L (2P):
L ARMS
When attaching arm M (2P):
L ARMS
When attaching arm S (2P):
L ARMS
PHOTO 13-2a
SENSOR BRACKET HP
S ARMS
M ARMS
SENSOR BRACKET HP
M ARMS S ARMS
SENSOR BRACKET HP
M ARMS S ARMS
FIG. 13-2a
STICKER
STICKER
STICKER
STICKER