Huawei FusionModule800 Quick Manual page 36

4. Connect the communications cables to the T/H sensors.
T/H sensor 2
Temperature sensor
14.6 Installing T/H Sensors (33010516)
• The figure is for reference only. Install the devices based on site requirements.
The NetCol remote T/H sensors are attached to the leftmost and rightmost IT cabinets near
•
aisle columns.
Installing one T/H sensor when only one NetCol is configured
A: Position for installing the T/H sensor for the NetCol at the bottom of the Converged Cabinet,
28 U
ECC800
T/H sensor 1
35