Huawei FusionModule800 Quick Manual page 35

3. Set device addresses for the T/H sensors.
• Toggles 1 to 6 of the DIP switch are used to set the device address, toggle 7 is reserved, and toggle 8 is
used to switch the temperature display mode.
• The device address is set in binary mode. 1 is the least significant bit (LSB), and 6 is the most significant
bit (MSB). ON indicates 1, and OFF indicates 0. The address range is 1 to 4.
The numbers 1–4 indicate the toggle switch settings of the T/H sensors.
•
Toggle
T/H Sensor
Switch
Address
1
1 ON
2 OFF
3 ON
4 OFF
Toggle Toggle Toggle
Switch Switch Switch
2 3 4
OFF OFF OFF
ON OFF OFF
ON OFF OFF
OFF ON OFF
34
Toggle Toggle Toggle
Switch Switch Switch
5 6 7
OFF OFF
OFF OFF
OFF OFF
OFF OFF
Toggle
Switch
8
OFF OFF
OFF OFF
OFF OFF
OFF OFF