Huawei FusionModule800 Quick Manual page 34

h. Install hard disk 0 in the same way.
i. Reinstall the chassis cover and screws.
j. Install floating nuts.
k. Install mounting brackets on the VCN510.
14.5 Installing Temperature Sensors and T/H Sensors (02312PBL)
Number of cabinets ≤ 6
Number of cabinets > 6
1. Bind the temperature sensors to the right
posts of the front and rear doors about 1.6
m above the floor using cable ties.
l. Secure the VCN510 to the 40–41 U position
in the cabinet. The location can be adjusted
based on the actual situation.
2. Install a T/H sensor base at the right
post position of the IT cabinet about 1.6
m high above the floor, and then clamp
the T/H sensor onto the base.
33