4-20 Ma Setting; Output Item Selection - Optex TS-1000-D Instruction Manual

6

4-20 mA Setting

Set the 4-20 mA signal output setting from SC-U1.
The factory default setting is OFF for 4-20 mA signal output.
To set 4-20 mA output setting, press
Caution
Pressing

Output item selection

Select an item to output by 4-20 mA signal.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.3 4-20 mA Setting" and " ◆ Output Item Select".
When "Display item" P.13 is changed, the output item of the
channel of 4-20 mA setting that has set the display item becomes
Caution
OFF.
Set again if necessary.
Output item [Display]
Suspended solids [SS]
Transparency [Trans.]
automatically retains the measurement value.
.
15