Table of Contents
Advertisement
1
Safety Precautions
This product is a vehicle detection sensor designed for a car counting , installed beside a drive
way. Do not use the product for other purposes.
For Safe Use
About the Marks
The description given here is for correct usage of the product without causing damage to you,
other personnel as well as damage to properties.The marks and their meanings are as follows:
Please read the text after understanding the contents well.
WARNING
CAUTION
EXAMPLES OF GRAPHICAL INDICATION
The △ symbol indicates what you need to pay attention to (including warning). The specific
warnings are indicated in the symbol (the figure to the left indicates danger of electric shock).
The symbol indicates prohibition. The specific warnings are indicated in or near the
symbol (the figure to the left indicates prohibition of disassembly).
The symbol indicates a compulsory conduct or an item to be observed. The specific instructions
are indicated in or near the symbol (the figure to the left indicates that power should be turned off).
Do not touch with wet hands
Do not disassemble
or remodel the unit
Turn OFF the system
power in case of
abnormality
Use the unit within the
scope of its specifications
Always turn off the power
during installation
Do not water the unit
with high pressure water
Perform wiring
tightly and surely
Fix tightly
Install and configure
the units properly
Regularly clean the unit
Failure to follow the instructions provided with this indication and improper handling
may cause death or serious injury.
Failure to follow the instructions provided with this indication and improper handling
may cause injury and/or property damage.
WARNING
Do not touch the main unit or the power supply terminal with wet hands (Do not
touch them when hands are wet with rain as well). Electric shock may occur.
NEVER perform disassembly or modification of the unit which is dangerous.
Fire or electric shock may occur.
Should you use the unit under abnormal conditions if there is smoke or a
smell, it may cause fire, electric shock, or burns.Immediately turn off the
power and contact the contractor.
Use the unit within the scope of the specifications designated by this
document. The unit will not work properly and fire or electric shock may occur.
Always turn off the unit's power on installation and/or wiring.
Electric shock may occur.
CAUTION
Do not water the unit with bucket, hose, and/or high pressure washing
machine. Water may get in the unit and cause damage.
Follow the steps described in this document for wiring. Fire or electric shock
may occur.
Follow the steps described in this document when attaching the unit to a pole.
The units may fall or its cable may become loose, resulting in injury, fire, and/or electric shock.
Follow the steps described in this document for proper installation, configuration,
and operation check. It may result in a failure of vehicle detection.
Please clean the unit regularly.
If you find any abnormality, do not use it.
-2-
Advertisement
Table of Contents
