Dmx Control (Cl1+ Only); Global Intensity; Global Shutter / Pattern Shutter - GLP Creative Light 1 User Manual

10. DMX control (CL1+ only)

If you set the fixture to SIGNAL SOURCE → CRMX in the SIGNAL SETTINGS menu (you
can also press and hold the DOWN button to scroll through the control signal
sources), you can control the CL1+ using a DMX signal sent via a CRMX wireless DMX
transmitter. The CL1+ has three DMX control modes, with the following possibilities.

Global intensity

The intensity channel provides dimming of the fixture in 8-bit resolution on channel 1
in all DMX modes.

Global Shutter / Pattern Shutter

You can apply a shutter / strobe effect to the whole fixture in all DMX modes. In
Pattern DMX Mode, you can also apply the shutter / strobe effect to any pattern
that you have superimposed onto the main 'scene'. The control options available for
the whole fixture and for the pattern are the same:
• Closed blacks out the fixture.
• Music Trigger Flash gives one single flash each time you change the DMX value in
this slot range. This option lets you manually send flashes whenever you like. This
could be in time with a music beat, for example.
• Random Pulse is a shutter pulse that rhythmically increases and decreases output.
You can adjust the rate of the pulse by changing the DMX value within this slot
range.
• Random Pulse Open fades light in and then snaps to blackout. You can adjust the
rate of the pulse by changing the DMX value within this slot range.
• Random Pulse Close fades light out and then snaps to full. You can adjust the rate
of the pulse by changing the DMX value within this slot range.
• Random Double Flash performs a fast double flash. You can adjust the speed of
the double flash by changing the DMX value within this slot range.
• Strobe Random Pixel sets individual pixels to flash at random, giving a kind of
sparkle effect. You can adjust the rate of the sparkle by changing the DMX value
within this slot range.
• Strobe Random All flashes all the fixture's pixels together with a random interval
between flashes. This lets you set up a classic effect consisting of a random strobe
running on multiple fixtures. You can adjust the speed of the random flashes by
changing the DMX value within this slot range. Note that the random effect between
multiple fixtures really is totally random!
• Strobe Sync All flashes all of the pixels of multiple fixtures in a perfectly
synchronized strobe effect. You can adjust the speed of the strobe by changing
the DMX value within this slot range.
• Open gives full intensity continuous output.
CL1 / CL1+ User Manual
28
www.glp.de