4. Control panel and display
The control panel on the front of the CL1 consists of an integrated monochrome
OLED display and four control buttons.
Control panel display
The CL1's OLED display shows the following information:
CL1 / CL1+ User Manual
P01/S04/X04
N
Show
Main status display
If the CL1 or CL1+ is in Manual Mode:
•
Shows the selected Pattern, Speed and Crossfading
settings. For example: P01/S04/X04 indicates Pattern 01,
Pattern Speed 04 and XFade setting 04.
If the CL1 or CL1+ is in iQ.Mesh mode:
•
Shows iQ.Mesh status.
If the CL1+ is in DMX Mode:
•
Shows the DMX Mode and the DMX Start Address. For
example, DMX-M2-302 indicates DMX Mode, Control
Mode 2 and DMX Start Address 302.
Charge status
Remaining battery charge.
•
Plug icon shows that the device is connected to power.
•
Increasing sectors in the battery icon indicate that the
•
device is charging.
Audio triggering
Internal audio triggering microphone enabled / disabled.
•
Audio triggering microphone sensitivity 1 (lowest) to 10
•
(highest).
Software
Currently installed firmware version.
•
V1.2
10
IR ON
10
www.glp.de