Preparing For Use; Charging - GLP Creative Light 1 User Manual

5. Preparing for use

Warning! Read 'Safety' starting on page 5 for important safety
information that you must understand before you charge, install or
operate the fixture. Follow the warnings and instructions in the user
documentation of all involved products during charging.
Important! Connect the CL1 to a USB power source and charge it to 100%
before using it for the first time. To avoid draining the battery
unnecessarily, power the CL1 off when not in use and apply the transport
lock before long-term storage or transport.

Charging

Charge the CL1 to100% before using it for the first time.
When using the GLP Creative Light app, you can see the CL1's current battery
charge level on your smartphone.
USB-C
See Figure 3. After unboxing the CL1 and before you switch it on, connect it to a
source of USB power using the supplied USB-A-to-USB-C cable in order to charge it.
The power source can be a laptop, USB charger or powerbank, for example, that
can supply minimum 1 amp.
A 1 amp power supply is suitable for charging only: the CL1 must be powered off
during charging. When operating the CL1 continuously under external power, the
CL1 requires a current of minimum 2 amps in Normal and Eco power modes and
3 amps in High power mode. The CL1 is designed for use with normal and fast
charging, but using USB superfast charging together with a USB-C to USB-C cable
may result in the battery not being fully charged.
CL1 / CL1+ User Manual
Figure 3. Charging options
Docking
station
14
www.glp.de