Manual Control - GLP Creative Light 1 User Manual

7. Manual control

If you set the CL1 to MANUAL / IR REMOTE CONTROL in the SIGNAL SETTINGS menu
(you can also use a shortcut by pressing and holding the DOWN button to scroll
through the control signal sources), you can control it manually using the CL1's
integrated control panel.
Manual control gives the same options as Pattern DMX Mode (see 'DMX Mode 2:
Pattern' on page 39). Additionally, you can set changes between steps in patterns
to snap (instant change from one step to the next) or crossfade (fade from one step
to the next).
The control options available when using Manual control are as follows:
• Master Intensity gives 0 – 100% continuous dimming of the complete fixture.
• Main Color lets you set the LED pixels to display a custom RGB color, one of 30
color presets or one of 4 color chaser options.
• FX Layer provides control of 40 patterns that can be superimposed over the main
color with variable visibility and speed. You can control pattern intensity and color
using RGB color mixing plus the color presets from the Color Wheel DMX channel.
• Color Crossfade lets you set steps in the pattern to snap or fade to the next.
CL1 / CL1+ User Manual
20
www.glp.de