GLP Creative Light 1 User Manual page 27

German Light Products®
of the screen) give control of a second layer, the pattern layer, which will always
appear on top of the main layer. As long the intensity of this layer is set to zero, the
pattern layer is transparent and not visible. If you set pattern intensity to 100%, the
layer is fully visible on top of the main layer. For the Pattern layer you can set
intensity, intensity effects, colors and different pattern effects.
Playback Area
Tapping the Playback button (see
Figure 17.) opens the Playback
area, where you can save
individual light settings from the
Main/Live area.
The Playback area lets you store or
recall light scenes.
See Figure 18. The 24 Playback
buttons on the left are permanent
playback buttons. The 8 buttons on
the right are temporary flash
playback buttons.
To store a light scene from the
Main/Live area, enable recording
by pressing and holding the REC
button (arrowed) for 3 seconds and
then save the scene to one of the
Playback buttons.
You can also lock the Playback area by tapping and holding the lock button for 3
seconds. This will help you avoid deleting or storing playbacks by accident.
If you would like to learn more about the Creative Light app, please visit our
homepage at www.glp.de.
Figure 17. Playbacks button
Figure 18. Playback area
27 Rev. 20210303-01