GLP Creative Light 1 User Manual page 11

German Light Products®
Power mode
• N – Normal. Output is balanced for long performance with
optimized output. Performance time depends on intensity
level and color. Continuous performance without battery
charges requires an external power supply of minimum 2
amps.
• H – High Power. Output is optimized for highest brightness.
Performance time depends on intensity level and color.
Continuous performance without battery charges requires
an external power supply of minimum 3 amps.
• E – Eco. Output is optimized for longest performance time
between battery charges. Performance time depends on
intensity level and color. Continuous performance without
battery charges requires an external power supply of
minimum 2 amps.
Signal status
Show – Fixture is in Manual Mode. The standalone pattern
•
can be selected using the IR remote control or the
integrated control buttons.
No Signal (CL1+ only) – Fixture is in DMX Mode but is not
•
receiving DMX data via CRMX. The fixture is following the
settings that are currently active in the NO-SIGNAL
BEHAVIOR menu.
DMX (CL1+ only) – Fixture is in DMX Mode and is receiving
•
DMX data via CRMX.
Signal source
IR (ON) – Manual Mode is selected and IR remote control
•
is enabled. You can control the fixture using the
integrated control buttons (MANUAL CONTROL menu) or
the IR remote control.
IR (OFF) – Manual Mode is selected and IR remote control
•
is disabled. You can control the fixture using the
integrated control buttons (MANUAL CONTROL menu).
CRMX (CL1+ only) – LumenRadio CRMX module is enabled
•
and the CL1+ is ready to be controlled via DMX. The status
of CRMX communication is indicated as follows:
Horizontal dashes – the CRMX module is
not linked to a CRMX transmitter.
Vertical bars – the CRMX module is linked
to a CRMX transmitter. The bars indicate
signal quality.
11 Rev. 20210303-01