Cvt System - Linhai M750L T3 Owner's/Operator's Manual

M750L T3 OWNER'S/OPERATOR'S MANUAL 17.0

13. CVT SYSTEM

WARNING
The CVT system rotates at high speeds, creating large amounts of force on
clutch components. However, as the owner you have the following
responsibilities to make sure this system remains safe:
 Do not modify any component of the CAT system. Doing so may reduce its
strength so that a failure may occur at high speeds. Any modification will cause
the system to be out of balance, creating vibration and additional loads on
components.
 Routine maintenance is the responsibility of the owner. Always follow
recommended maintenance procedures. See you dealer!
 The CVT housing must be securely in place during operation.
Failure to comply with this warning can result in severe injury or death.
Low Range Use May Reduce CVT Operating Temperatures
The basic operation of the CVT system is dependent on engine speed and
vehicle torque requirements. As engine speed increased, the force exerted on
the movable drive sheave by the fly-weights also increases. This, in turn,
increases the amount of "pinch" applied to the drive belt. Similarly, if the engine
speed decrease, the amount of centrifugal; force decreases, reducing the
amount of belt "pinch.
13-1