Field Name
APN Settings
section
APN Name
Wired WAN Monitor
On this page, you can configure the settings for monitoring the LTE connection between your provider and your gateway.
1. In the left navigation bar, click
2. Click the
Enable Active Monitor
3. Modify the settings as needed, using the information provided in the table below.
4. Click
Save/Apply
to commit your changes.
The fields on this page are explained in the following table.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
Enter the Access Point Name for your network provider.
LTE WAN Service
>
Wired WAN
checkbox. The fields on the page become available.
Monitor.
100