Table of Contents
Advertisement
Field Name
Description
Destination IP address
Enter the destination IP address for rule. For IPv6, enter the prefix as well.
[/prefix length]
Destination Port (port or
Enter destination port number or range (xxxxx:yyyyy).
port:port)
Select the WAN interfaces to which this rule will be applied. Options are Select All or the inter-
WAN Interfaces
faces defined for your network. The default is Select All .
MAC Filtering
Your SmartRG gateway can block or forward packets based on the originating device. This MAC filtering feature is available only in
Bridge mode. For other modes, similar functionality is available via IP Filtering. On this page, you can manage MAC filtering for your
gateway.
1. In the left navigation bar, click
2. To modify policy settings:
a. Review the information on the page.
b. Once you understand the consequences of changing the policy, click the
Policy. The policy is switched to FORWARD or BLOCKED.
3. To add a rule, follow the instructions in
4. To remove a rule, click the
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Advanced Setup
>
Security
"MAC
Filtering".
Remove
checkbox next to the rule and click the
>
MAC
Filtering. The following page appears.
Change
Remove
button.
checkbox, and then click
Change
64
Advertisement
Table of Contents
