Table of Contents
Advertisement
Field Name
Enable Fullcone NAT
Enable Firewall
Enable SIP ALG
IGMP Multicast
section
Enable IGMP Multicast
Proxy
Enable IGMP Multicast
Source
MLD Multicast section
Enable MLD Multicast
Proxy
Enable MLD Multicast
Source
Use Base MAC Address
on this WAN interface
9. For the remaining WAN Service configuration pages, use the instructions provided in the
over Ethernet section.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Descriptopn
across multiple devices on the LAN. Also enables the functions in the NAT
sub-menu and addition PPPoE NAT features to select. Click the checkbox to
disable NAT.
Enables one-to-one NAT.
This option is enabled by default and enables functions in the
sub-menu.
Click to enable Session Initiation Protocol (SIP) pass-through NAT. Used for
Voice over IP (VOIP) applications.
Click to enable Internet Group Membership Protocol (IGMP) multicast.
Used by IPv4 hosts to report multicast group memberships to any neigh-
boring multicast routers.
Click to enable this service to act as an IGMP multicast source.
Click to enable multicast filtering. Used by IPv4 hosts to report multicast
group memberships to any neighboring multicast routers.
Click to enable this service to act as a multicast source.
Click to use the gateway's base (Primary) MAC address. Otherwise, a unique
MAC is assigned for each service.
Security
default gateway step
in the PPP
44
Advertisement
Table of Contents
