Ethernet Config - ADTRAN SR700ac User Manual

Hide thumbs Also See for SR700ac:
Table of Contents

Advertisement

Field Name
Description
Stateful
Click this option to identify the DHCPv6 server given by the LAN IPV6 network as configured with additional
options. Zero compression is not supported. Make sure to enter zeros between the colons, that is, do not
use shorthand notation (::2). Options are:
l
l
l
( Optional ) This option is enabled by default. It enables Router Advertisement Daemon (RADVD) service that
Enable RADVD
sends router advertisements to LAN clients. To disable RADVD, clear the check box. Options are:
l
l
l
Enable MLD Snooping ( Optional ) This option is enabled by default. It enables Multicast Listener Discovery (MLD) snooping to man-
age IPV6 multicast traffic. Options are:
l
l
( Optional ) This option is enabled by default. It enables LAN-to-LAN Multicast until the first WAN service is
Enable MLD LAN to
connected. Options are Disable and Enable . The default is Disable .
LAN Multicast

Ethernet Config

On this page, you can set the speed and duplex mode for the Ethernet ports and the WAN port, if configured,
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Start interface ID: Enter the beginning IPv6 available addresses for DHCP to assign to LAN devices.
End interface ID: Enter the ending IPv6 available addresses for DHCP to assign to LAN devices.
Leased Time (hour): Amount of time before a new IPv6 lease is requested by the LAN client.
Randomly Generate: This option is selected by default. The prefix is generated automatically.
Enable ULA Prefix Advertisement: Check this option to enable unique local address (ULA) advert-
isement on the LAN. When you select this option, the
gateway can generate a random IPv6 prefix.
Statically Configure: Select this option to configure the IPv6 prefix, and enter values in the Prefix,
Preferred Life
Time, and
Valid Life Time
(no limit).
Standard Mode: Multicast traffic will flood to all bridge ports when no client subscribes to a mul-
ticast group even if IGMP snooping is enabled.
Blocking Mode: The multicast data traffic will be blocked and not flood to all bridge ports when
there are no client subscriptions to any multicast group. This is the default.
Randomly Generate
fields (in hours). The default value for the Time fields is -1
option is selected and the
54

Advertisement

Table of Contents
loading

Table of Contents