Open & Shared Authentication - ADTRAN SR700ac User Manual

Hide thumbs Also See for SR700ac:
Table of Contents

Advertisement

Field Name
Description
( Appears when WPS is enabled ) The PIN for the gateway. This value is generated by the access
Device PIN
point.
Manual Setup AP
section
Select SSID
Select the SSID of the wireless network to which this security configuration will apply.
Select the desired network security authentication type. Options are Open , Shared , 802.1X ,
Network
Authentication
WPA2 , WPA2-PSK , Mixed WPA2/WPA , and Mixed WPA2/WPA-PSK .
The fields shown in the
Manual Setup AP
variations are explained in the following sections:
"Open & Shared Authentication"
l
"802.1X Authentication"
l
"WPA2 & Mixed WPA2/WPA Authentication"
l
"WPA2-PSK & Mixed WPA2/WPA-PSK Authentication"
l
Open & Shared Authentication
The same configuration fields apply for both Open and Shared authentication types. However, WPS may not be used with the Shared
method.
1. On the Wireless > Security page for the band that you want to configure, select Open or Shared in the
ation
field.
2. For Open authentication, in the
Note: For Shared authentication, this option is set to Disabled and cannot be changed.
3. Fill in the fields, using the information in the field description table below.
4. Click
Apply/Save
to save the settings.
The fields on this page are explained in the following table.
Field Name
Description
WEP Encryption
Select to enable Wired Equivalent Privacy (WEP) mode. Options are Enabled and
Disabled .
( Appears when
Encryption Strength
tion method. Options are 128-bit and 64-bit . 128-bit is the more robust option for
security.
( Appears when
Current Network Key
presently in effect.
( Appears when
Network Key 1-4
keys using the on-screen instructions to achieve the desired security strength (128-
bit or 64-bit).
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
section of the page vary based on the network authentication method that you select. The
Enable WPS
field, select Enabled. Additional fields appear.
WEP Encryption
is set to Enabled ) Select the length of the encryp-
WEP Encryption
is set to Enabled ) Select which of the four keys is
WEP Encryption
is set to Enabled ) Enter up to four encryption
Network Authentic-
108

Advertisement

Table of Contents
loading

Table of Contents