Table of Contents
Advertisement
4. To modify the system log settings:
a. Click
Configure System
b. Modify the settings as needed.
The following table describes the options for configuration of the system log.
Action
Log
Log Level
Display Level
Mode
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Log. The System Log - Configuration page appears.
Description
Select to turn logging off or on. The default is Disable .
Select Error unless actively troubleshooting a situation with a subscriber for which
increased log detail is required. Options are Emergency , Alert , Critical , Error, Warn-
ing , Notice , Informational , and Debugging . The options are listed in top-down order
of increasing detail. The default is Debugging (all information).
Select Error unless actively troubleshooting a situation with a subscriber for which
increased detail is required. This field has the same options as the
field. The default is Error .
Controls where log events will be sent. Options are:
To send logs to the specified IP address and UDP port of a remote syslog
l
server, select Remote or Both.
To record events in the local memory of your SmartRG gateway, select Local
l
or Both.
The default is Local.
Logging Level
134
Advertisement
Table of Contents
