Table of Contents
Advertisement
1. In the left navigation bar, select
2. In the
Multicast Precedence
Disable: IGMP packets are not prioritized. This is the default.
l
Enable: IGMP packets are prioritized using the multicast precedence value. The lower the multicast precedence
l
value, the higher that IGMP packets will be placed in the queue.
3. In the
Multicast Strict Grouping Enforcement
Enable. The default is Disable.
4. Modify the other fields as needed, using the information in the table below. The same fields are provided for both IGMP and
MLD configuration.
5. To add an IPaddress to a group exception list, type the IP address and mask/mask bits in the appropriate fields and click Add.
6. Click
Apply/Save
to commit your changes.
7. To remove an IP addresses from a group exception list, click the
Remove Checked
Entries.
The fields on this page are explained in the following table.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Advanced Setup
> Multicast. The following page appears.
field, select whether IGMP packets are given priority handling and at what level. Options are:
field, select whether grouping is stricly enforced. Options are Disable and
Remove
checkbox next to the address and then click
96
Advertisement
Table of Contents
