Table of Contents
Advertisement
Field Name
Description
Ether Type
Select the Ethernet interface type for this classification. Options include:
IP , ARP , IPV6 , PPoE_DISC , PPoE_SES , 8865 , 8866 ,and 8021Q .
Source MAC Address
Enter the source MAC address and mask for this classification.
Source MAC Mask
Destination MAC Address
Enter the destination MAC address and mask for this classification.
Destination MAC Mask
( Appear when you select IP or IPv6 in the
Source IP Address/Mask
Vendor Class ID
option and enter the appropriate value, i.e, the source IP address and
User Class ID
Source IP mask, vendor class ID, or user class ID.
Destination IP
Enter the destination IP Address and Mask for this classification.
Address/Mask
Differentiated Service
Select the DSCP code that must be present in the queue identifiers.
Code Point (DSCP) Check
Enter the protocol specified for this classification. Options are TCP , UDP ,
Protocol
ICMP , and IGMP .
( Appears when TCP or UDP is selected in the
UDP/TCP Source Port
source port for this classification. You can enter a single port or a range of
ports (port:port).
( Appears when TCP or UDP is selected in the
UDP/TCP Destination Port
tination port for this classification. You can enter a single port or a range of
ports (port:port).
(Appears when 8021Q is selected in the
802.1p Priority Check
level. Options are 1 - 7.
Specify Classification Results
Specify Egress Interface
Select the egress interface for this rule. Options are the interfaces already
configured.
Specify Egress Queue
Select the egress queue for this rule. Options are the queues already con-
figured.
Mark Differentiated Ser-
Select the desired DSCP code.
vice Code Point
Mark 802.1P priority
This value is inserted into the Ethernet frame and used to differentiate
traffic. Lower values assign higher priorities. Options are 1 - 7 .
Set Rate Limit
Enter the data traffic rate limit in Kbits/second) applied for this clas-
sification.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
section
Ether Type
field ) Select an
Protocol
field ) Enter the
Protocol
field ) Enter the des-
Ether Type
field) Select priority
74
Advertisement
Table of Contents
