Table of Contents
Advertisement
WiFi or WLAN Button
The button labeled WiFi or WLAN (depending on model) toggles the WiFi radio on and off. The WLAN LED indicator on the gateway dis-
plays the current state of the Wi-Fi radio. This button is located on the top of the gateway.
To activate the Wi-Fi radio, press and hold the WiFi (WLAN) button for 3-5 seconds and then release. Expect a 1-3 second delay
before the WiFi (WLAN) LED turns on. Repeat this step to deactivate the Wi-Fi radio.
Reset Button
The Reset button is a small hole in the gateway's enclosure with the actual button mounted behind the surface. This style of push-
button prevents the gateway from being inadvertently reset during handling. Reset must be actuated with a paper clip or similar
implement. This button is located on the back of the gateway.
This pin-hole sized reset button has three functions. The duration for which the button is held dictates which function is carried
out.
Hold Duration
Effect
Less than 4 seconds Performs a modem reset that is equivalent to the
4 - 12 seconds
Performs the software equivalent to the
12 or more seconds Changes the POWER LED to red and the gateway enters CFE mode which is a state associated with performing
firmware updates via Internet browser.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Reboot
function in the gateway software.
Restore Defaults
function in the gateway software.
8
Advertisement
Table of Contents
