Table of Contents
Advertisement
Field Name
Description
Source IP
Enter the source IP address of a LAN side host for which you wish to filter/block outgoing traffic for
address [/prefix
the specified protocol(s).
length]
Note: The address specified here can be a particular address or a block of IP addresses on a given net-
work subnet. This is done by appending the associated routing "/prefix" length decimal value (pre-
ceded with the slash) to the addresses. A valid decimal routing prefix is required for defining the
subnet mask per CIDR notation.
Source Port (port
Set the outgoing host port (or range of ports) for the above host (or range of hosts defined by optional
or port:port)
routing or "/prefix" subnet mask) to define the ports profile for which egress traffic will be filtered
from reaching the specified destination(s).
Destination IP
Enter the destination IP address of a LAN side host for which you wish to filter/block outgoing traffic
address
for the specified protocol(s).
Note: The address specified here can be a particular address or a block of IP address on a given net-
work subnet. This is done through appending the address with the routing " /prefix " length decimal
value (preceded with the slash) associated. A valid decimal routing prefix is required for defining the
subnet mask per CIDR notation.
Destination Port
Set the destination host port (or range of ports) for the above host (or range of hosts) to define the
(port or port:-
destination port profile for which the filtered host egress traffic will be filtered from reaching the
port)
otherwise intended destination(s), e.g., to block the traffic to those ports on, say, a computer
external to the local network.
IP Filtering - Incoming
On this page, you can add an incoming filter when refusal of data from the WAN to the LAN is desired.
Note:
This option is not available in the SR515ac model.
1. In the left navigation bar, click
appears.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Advanced Setup
>
Security
>
IP Filtering
>
Incoming
and then click Add. The following page
62
Advertisement
Table of Contents
