Table of Contents
Advertisement
2. Select the Layer2 interface to use for the WAN service and click Next. The following page appears.
3. Select the
IP over Ethernet
4. Modify the other fields as needed.
The fields on this page are explained in the following table.
Field Name
Description
( Optional ) Enter a name to describe this configuration.
Enter Service
Description
Enter a priority for this WAN service. Options are 0 - 7 . The default is 0 .
Enter 802.1P Pri-
ority
For tagged service, enter values in this field and the
For untagged service, enter -1 (disabled) in this field and the
Enter the VLAN ID for this WAN service. Options are 0 - 4094 . The default is -1 (disabled).
Enter 802.1Q VLAN
ID
For tagged service, enter values in this field and the
For untagged service, enter -1 (disabled) in this field and the
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
WAN service type.
802.1Q VLAN ID
field.
802.1Q VLAN ID
field.
802.1P Priority
field.
802.1P Priority
field.
40
Advertisement
Table of Contents
