Front Lower Wall Assembly - KidKraft WINDALE Installation And Operating Instructions Manual

Part A
Step 22: Front Lower Wall Assembly
Part 1
A: On the Front Wall, tight to the bottom of (1906) Top Front Back and flush to the outside of (2215) Post and
(2213) Front Divider, attach (2226) Wall Board with 4 (S2) #8 x 1-1/2" Wood Screws (fig. 22.1 and 22.2)
B: Tight to the bottom of (2226) Wall Board attach 1 (2222) Side Window flush to the outside of both (2215) Post
and (2213) Front Divider with 4 (S2) #8 x 1-1/2" Wood Screws per board. Make sure the pilot holes are closer to
the outside of the boards. (fig. 22.2)
C: Tight to the bottom of each (2222) Side Window and flush to the outside of both (2215) Post and (2213) Front
Divider attach (2214) Lower Window with 4 (S2) #8 x 1-1/2" Wood Screws. (fig. 22.2)
D: Tight to the top of (2210) Front Back Ground and flush to the outside of (2215) Post and (2213) Front Divider,
attach 1 (2219) Siding with 2 (S0) #8 x 7/8" Truss Screws. (fig. 22.2)
Fig. 22.2
S2
x 4 per board
Notice
position of
pilot holes
2214
2215
2219
S0
Wood Parts
1 x Wall Board 1 x 5 x 20"
2226
2 x Side Window 1 x 4 x 12-3/4"
2222
1 x Lower Window 1 x 3 x 20"
2214
1 x Siding 3/8 x 3-1/2 x 20"
2219
Front Lower Wall
Part A
1906
2222
2210
2 x
S0
16 x
2226
1906
Notice
position of
pilot holes
2213
S0
Hardware
#8 x 7/8" Truss Screw
#8 x 1-1/2" Wood Screw
S2
38
Fig. 22.1