Attach Glider And Swings - KidKraft WINDALE Installation And Operating Instructions Manual

Step 33: Attach Glider and Swings
WARNING:
for bolts protruding beyond T-Nuts. Use
extra washers to eliminate this condition.
A: Connect the assembled Glider to the Glider Hangers previously installed. (fig. 33.1)
B: Attach 2 Belt Swings to the Bolt-Thru Swing Hangers. (fig. 33.1)
Check entire play centre
Fig. 33.1
Belt Swings
Glider
53
If Bolt protrudes
beyond T-Nut
Use an extra
Flat Washer
Other Parts
2 x Belt Swings