Table of Contents
Advertisement
Preparing Superdome for Booting
Attaching the Leveling Feet and Leveling the SPU Cabinet
Attaching the Leveling Feet and Leveling the SPU Cabinet
After you position the SPU cabinet, attach and adjust the leveling feet using the following procedure:
Step 1. Remove the leveling feet from their packages.
Step 2. Attach the leveling feet to the cabinet using four (T25 Torx) screws.
Figure 3-9Attaching the Leveling Feet
S 5
B P
S 4
B P
60IN016A
6/2/00
Step 3. Screw down each leveling foot clockwise, until it is in firm contact with the floor.
41
Chapter 3
Advertisement
Table of Contents
