Connecting Multiple SPU Cabinets
Removing the Rear EMI Panel
Removing the Rear EMI Panel
To make the necessary switch settings and to connect the proper cables, you'll need to remove the back EMI
panel from each cabinet.
To remove the back EMI panel:
Step 1. Loosen the captive screw at the lower center of the back EMI panel.
Figure G-3Removing the Back EMI Panel
L3-L1
L2-L3
L1-L2
L3-L1
L2-L3
L1-L2
Back EMI Panel Screw
60IN025A
9/8/00
Step 2. Use the handle provided to gently remove the EMI panel and set it aside.
Step 3. Remove the EMI panel for the other cabinet shipped with the system.
184
Appendix G