hp Server rx2600 Support Management Station
Installing the hp Server rx2600 SMS
Installing the hp Server rx2600 SMS
Figure A-1
hp Server rx2600 Without Front Bezel
The hp Server rx2600 is installed only in a peripheral equipment rack and uses the optional TFT5600
rack-mounted monitor, keyboard, and mouse. In addition the new SMS uses the C7508A Tape Array for
booting and other management functions. This appendix describes the rack-mounting procedures and how to
prepare the hp Server rx2600 for use as the new Superdome SDnn SMS.
Required Tools
The following tools are required to modify and mount the cabinet slide rails:
•
TorX drivers: #10, #15, and #20
•
Number 2 Phillips head screwdriver
•
3/8-inch nut driver
Racking the hp Server rx2600 SMS
The rack-mount kit is supplied with a complete procedure, installation guide, midweight slide kit,
hp5064-9670, to mount the hp Server rx2600 into an equipment rack. The following procedure augments this
procedure:
Step 1. Open the hp Server rx2600 field rack kit and remove the left and right rack rails (part number
5064-9671).
Step 2. Use the supplied installation guide mentioned above to mount both the left and right rack slides
into the rack.
132
Appendix A