Table of Contents
Advertisement
Preferred types are HP70092, HP70096 or HP70094, HP70098.
Step 8. Click Apply.
This option is not highlighted if the terminal type you want is already selected.
Step 9. Click OK.
Connecting the CE Tool to the Local RS-232 Port on the GSP (Recommended)
This connection allows you to communicate directly with the GSP. You can create one window only on your
CE tool to monitor the GSP. When enabled, it gives you direct access to the GSP and any partition.
Use the following procedure to connect the CE tool to the Local RS-232 Port on the GSP:
Step 1. Connect one end of a Null modem cable (9-pin to 9-pin) to the Local RS-232 port on the GSP (the
second DB9 connector from the left).
Figure 3-21RJ-45 LAN and RS-232 Connectors in SPU Cabinet
Remote
RS232
Local
RS232
Step 2. Connect the other end of the RS-232 cable to the CE tool.
Chapter 3
Private
LAN
Customer
LAN
LAN and
RS-232 Connectors
Preparing Superdome for Booting
Setting Up the CE Tool (PC)
60IN050A
9/8/00
57
Advertisement
Table of Contents
