Table of Contents
Advertisement
Preparing Superdome for Booting
Installing the Front Door Bezels and the Front and Back Blower Bezels
The latch is located on the right side of the front door.
Step 2. Position the bezel over the blower housing frame, hooking the lip of the bezel onto the cross support
of the blower housing.
Figure 3-13Installing the Front Blower Bezel
Step 3. Align the bezel over the nuts that are attached to the bracket at the front of the cabinet.
Step 4. Using a T20 Torx driver, tighten the two captive screws on the lower flange of the bezel.
NOTE
Step 5. Close the front door.
46
Tighten the screws securely, otherwise the screw may interfere with your ability to
close the door.
60RR013A
5/31/01
Chapter 3
Advertisement
Table of Contents
