Table of Contents
Advertisement
Disassembling/ Assembling
To remove cover (1), loosen with a spanner. After cover (1)
is removed, gasket (2), strainer (3), and gasket (4) are easily
removed in order. Wash removed strainer (3) with light oil.
Install the strainer in the reverse order of disassembling.
At that time, install gasket (2) into cover (1) first. Securely
tighten cover (1) to pump (5) using a spanner.
f
NOTE: Wrench size: 17 mm
IMPORTANT:
Only carry out cleaning and replacement of the
strainer as well as the replacement of gaskets (2) and
(4) while servicing the machine. Never attempt to
disassemble other parts.
Gasket (4) can get caught with the shaft of pump (5),
making it difficult to remove the gasket, but do not
disassemble the shaft of pump (5). If the gasket is
difficult to remove, do not disassemble other parts
but extend gasket (4) to remove it. Use new gasket
(4) for assembling.
MAINTENANCE
Magnet
36 mm
28 mm
Gasket (4) is easily
removed by pulling
and stretching it.
Stretch gasket (4) to
remove.
7-75
1
2
3
4
2.7 mm
3
Do not disassemble this part.
5
M1GR-07-004
1 mm
2
4
M1U1-07-006
MDAA-07-054
MDAA-07-053
Advertisement
Table of Contents
