Table of Contents
Advertisement
5. Manual Shift (M)
After moving forward/reverse lever (10) to either forward
(F) or reverse (R) position, move the shift switch (11) to
the desired position. The transmission gear position can
be shifted in 5 ranges in the forward and 3 ranges in the
reverse mode. Select the most appropriate transmission
gear position according to the type of the work engaged
in or the driving road conditions.
Manual Mode:
Manual shift mode.
The transmission gear is shifted according to the
shift switch position.
To fix the transmission gear to manual 1st speed, turn
the shift switch to 2nd speed, and then push 1st speed
fixed switch regardless of the position of travel mode
selector (12). Refer to the page 1-102 for detailed
information.
6. Auto Shift
Set forward/reverse lever (10) to (F) or (R). Select the
most appropriate transmission gear position according
to the type of the work engaged in or the driving road
conditions. Select the most appropriate travel pattern by
operating travel mode selector (12).
AUTO 1 Mode:
This mode sets 1st speed as the minimum speed
gear stage.
Start traveling with 2nd speed. When driving
load increases, it automatically shifts to 1st
speed.
This mode is suited for heavy digging work or
ascending on a slope.
AUTO 2 Mode:
This mode sets 2nd speed as the minimum speed
gear stage.
This mode is suited for removing snow.
7. Release brake pedals (6) and step on accelerator pedal
(9) to start traveling.
DRIVING MACHINE
4-4
10, 11
1
F
2
N
3
R
4
AUTO 1 Mode
Manual Mode
AUTO 2 Mode
MNEC-01-037
12
MNEC-01-024
Advertisement
Table of Contents
