Table of Contents
Advertisement
Travel Mode Selector
The travel mode selector (1) selects the travel mode. Selecting
the manual mode "
" by using travel mode selector (1) sets
the transmission to manual mode, which allows manual shift
change by using shift switch (2). AUTO 1 and AUTO 2 are
choices selectable at auto-shift mode. Select the most efficient
mode for the travel and work condition.
Be sure to stop the machine and set forward/reverse lever
(2) in the neutral (N) position before operating travel mode
selector (1).
Manual Mode
: Manual gear shift (The gear shifts
according to the shift switch.)
AUTO 1 Mode
: Start traveling at 2nd speed. When
traveling load increases, it automatically
shifts from 2nd to 1st speed. (Auto DSS
function)
This mode is suited for heavy digging
work or ascending on a slope.
AUTO 2 Mode
: Start traveling at 2nd speed. This mode
uses 2nd or more gear shifts.
This mode is suited for removing snow.
Refer to "DRIVING MACHINE" section.
f
NOTE: The AUTO 1 mode shifts up to the set shift switch
position. When the shift switch is set to 4th speed, auto-shift
range is 1st to 4th speed. When the shift switch in set to 3rd
speed, auto-shift range is 1st to 3rd speed.
OPERATOR'S STATION
1-102
1
1, 2
1
F
2
N
3
R
4
1
MNEC-01-041
AUTO 1 Mode
Manual Mode (neutral)
AUTO 2 Mode
MNEC-01-024
MNEC-01-037
Advertisement
Table of Contents
