Loading - Hitachi ZW 310-6 Operator's Manual

Loading

IMPORTANT:
 Always maintain a clean surface for machine
operation.
Cleaning of materials such as soil spilled on the
driving surface will reduce wear and/or damage on
tires.
 When carrying loads in the bucket, pay attention to
the travel road surface conditions. Drive the machine
at such speed so that the load will not spill out of the
bucket, while positioning the bucket at the lowest
possible height.
 Refrain from allowing the bucket to come in contact
with the bucket stopper as much as possible when
removing adhered material, like clay, from the
bucket. Failure to do so may result in damage to the
front attachment.
Remove material stuck to the bucket by washing
with water.
Loading is dumping the handling material onto a truck or into
a hopper.
Loading work is performed in either the load and carrying
method or loader and dump truck method. Select either
method depending on the work site conditions while taking
the merits in cost and safety into account.
OPERATING MACHINE
5-18