Aftertreatment Device Manual Regeneration Request
The aftertreatment device needs regeneration. Usually,
regeneration is performed automatically. However, manual
regeneration is required depending on the conditions. The
marks described below may be indicated on monitor (1).
Also service indicator (2) will be indicated.
This mark indicates that the aftertreatment
device manual regeneration is required.
Perform manual regeneration following the
below procedure.
(Lighting,
Yellow)
This mark indicates that the aftertreatment
device regeneration is inhibited. Displayed
when the manual regeneration request arises
while aftertreatment device regeneration is
inhibited. Move the machine to a safe place.
(Lighting,
Perform manual regeneration following the
Yellow)
below procedure.
IMPORTANT:
Manual regeneration performed when the
aftertreatment device regeneration request is
displayed restores aftertreatment device function.
This is not a malfunction.
If the machine is continuously operated despite the
aftertreatment device regeneration request being
displayed, aftertreatment device alarm and engine
trouble alarm will be displayed, and the buzzer
sounds. Consult your authorized dealer.
OPERATOR'S STATION
1-34
1
2
Basic Screen
1
Rear View Camera Display
2
Basic Screen
(Operating Rear View Monitor)
MNEK-01-280EN
MNEK-01-281EN