Table of Contents
Advertisement
Replace Axle Oil Filter
--- every 500 hours or every 3 month whichever
comes first.
d
WARNING: Take care about the following points.
Starting repair work immediately after operation
may cause burns. Wait for oil to cool before starting
work.
Lock the front and rear frames with the articulation
lock bar.
IMPORTANT: Do not use axle oils other than those listed
in the "Brand Names of Recommended Axle Oil".
Replace Axle Oil Filter
1. Park the machine following the same procedures as
described on page 7-8 for preparation of inspection/
maintenance work.
2. Install articulation lock bar to the front and rear of the
frame by following the procedures described on page
7-10.
3. Remove bolts (1) (5 used) and cover (2).
OTHER ATTACHMENTS
Axle Oil Cooler
1
2
13-15
MNFA-13-002
Advertisement
Table of Contents
