Cigar Lighter
Using Cigar Lighter
d
WARNING: Never touch other than the knob part.
Otherwise, it may result in severe burns.
IMPORTANT: If the cigar lighter does not pop out
automatically 30 seconds after pushing the cigar
lighter in, pull out the cigar lighter manually. Consult
your nearest Hitachi dealer.
1. Turn key switch (1) ON.
2. Press and release lighter knob (2).
3. The cigar lighter knob will return to the original position
when the lighter becomes usable. Pull the cigar lighter
out to use.
4. After using the cigar lighter, insert the cigar lighter into
the panel until the knob is seated in the original position.
d
CAUTION: Do not power anything other than a
genuine Hitachi Construction Machinery electrical
device from the cigar lighter port.
Ash Tray
d
WARNING: Take precautions against fires.
Use ash tray (3) when smoking in the cab.
OPERATOR'S STATION
1-112
2
1
1
3
MNEC-01-038
MNDB-01-053