Table of Contents
Advertisement
Parking
IMPORTANT: When parking the machine with cab door
and windows open, cab electrical components may be
damaged by bad weather. Always close windows, roof
vent and cab door when parking the machine.
1. Stop and park the machine on level surface. Lower the
bucket to the ground.
2. Turn parking brake switch (1) ON.
IMPORTANT: This machine is equipped with a
turbocharged engine. If the engine is stopped without
performing cooling down operation, the lubricant on
the turbocharger bearing surfaces may desiccate due
to the intense heat present, possibly causing damage
to the turbocharger.
3. Run the engine at low idle speed to cool the engine for 5
minutes.
4. Turn key switch (2) to OFF position to stop the engine.
Remove the key from the switch.
5. Press LOCK ( ) side of control lever lock switch (3).
6. Before leaving the machine, close and lock all the
windows, cab doors, and covers.
DRIVING MACHINE
4-18
Stop and Parking Position
1
90Z7B-BKT td view
2
MNEC-01-036
3
MNEC-07-001
Advertisement
Table of Contents
