Table of Contents
Advertisement
Operating Procedures
d
WARNING:
When traveling on public roads, use steering
wheel (18). The use of joystick steering lever (8) is
prohibited.
When traveling at high speeds or driving in narrow
areas, use steering wheel (18).
When operating with steering wheel (18), turn
joystick steering selector switch (7) OFF. If part of
the driver's body should touch the joystick, it could
result in the machine moving unexpectedly and
result in a serious personal injury.
When operating steering wheel (18) and joystick
steering lever (8) at the same time, priority is given
to the operation that is displaced further from the
neutral position.
When the emergency steering function is activated,
use steering wheel (18) for turning.
If the machine steering activates despite not being
operated with the with joystick steering lever (8),
immediately return the accelerator pedal to the
idle position and correct the turning direction with
steering wheel (18), then stop the machine with
the service brake. Stop the engine and turn joystick
steering selector switch (7) OFF. Contact your
authorized dealer for repairs as soon as possible.
IMPORTANT: When joystick steering lever (8) is enabled,
the maximum speed when traveling is limited to
25 km/h. For inquiries about the maximum speed
settings, contact your authorized dealer.
Preparations before Operation
1. Perform inspections as detailed in "Check Before
Starting" and then to start the engine following the
procedure in "Starting Engine".
2. Put left console (16) in the operating position.
3. Press joystick steering selector switch (7) for 1 second in
its ON position. The joystick steering indicator (14) and
the Forward/Reverse selector switch indicator (15) are
displayed on the monitor.
OTHER ATTACHMENTS
Joystick Steering
13-7
Disabled Position
Operating Position
14
8
17
16
MNEK-13-005
MNEK-01-100
15
7
MNEK-13-002
18
MNEC-01-037
Advertisement
Table of Contents
