Table of Contents
Advertisement
Starting Engine
Follow the steps below to start the engine without depressing
accelerator pedal (3).
1. Check that both forward/reverse lever (8) and forward/
reverse switch (9) are in the neutral (N) position and
neutral lever lock (10) is in the LOCK position.
If the machine is equipped with joystick steering
(optional), put the Forward/Reverse switch on the left
console in the neutral (N) position. For information on
operating joystick steering (optional), refer to the section
"Joystick Steering" in Chapter 13.
2. Check that parking brake switch (1) is ON.
3. Turn the key switch (2) ON.
4. Check indicator bulbs
When key switch (2) is turned ON, all indicators and the
warning lights come and stay ON for 2 seconds. They go
OFF afterward. Any indicator and/or warning light that
fails to light at this time is a burned bulb.
However, the indicators for brake oil pressure (4) (When
the brake pressure is low) and discharge warning
indicator (5) will continue to stay ON, and it will go OFF
only after the engine is started.
Preheating will automatically start with the key switch
ON. The preheat indicator (6) will automatically come
ON.
f
NOTE: When the key switch is turned ON, the maintenance
notification for the item whose maintenance interval has
expired displays for 10 seconds. The display will disappear
when the Return switch
(8) or the forward/reverse switch is set in Forward (F) or
Reverse (R) position.
5. Check that parking brake indicator (7) is ON. When the
preheat lamp goes OFF (the engine has preheated),
sound the horn to clear any personnel away from the
area surrounding the machine.
OPERATING ENGINE
is pressed, forward/reverse lever
8
2
6
3-5
1
10
MNEC-01-036
MNDB-01-053
7
MNEC-01-073
9
MNEC-01-526
2
3
4
5
Advertisement
Table of Contents
