Table of Contents
Advertisement
Ensure Safety Before Rising from or Leaving
Operator's Seat
Before rising from the operator's seat to open / close either
side window or to adjust the seat position, be sure to first
lower the front attachment to the ground and then move
the control lever lock switch to the lock ( ) position. Failure
to do so may allow the machine to unexpectedly move
when a body part unintentionally comes in contact with a
control lever, possibly resulting in serious personal injury or
death.
Before leaving the machine, be sure to first lower the front
attachment to the ground and then move the control
lever lock switch to the lock ( ) position. Turn the parking
brake switch ON, and turn the key switch OFF to stop the
engine.
Before leaving the machine, close all windows, doors, and
access covers and lock them.
Fasten Your Seat Belt
If the machine should overturn, the operator may become
injured and/or thrown from the cab. Additionally the
operator may be crushed by the overturning machine,
resulting in serious injury or death.
Prior to operating the machine, thoroughly examine
webbing, buckle and attaching hardware. If any item is
damaged or worn, replace the seat belt or component
before operating the machine.
Be sure to remain seated with the seat belt securely
fastened at all times when the machine is in operation to
minimize the chance of injury from an accident.
We recommend that the seat belt be replaced every three
years regardless of its apparent condition.
SAFETY
S-7
SA-237
Advertisement
Table of Contents
