Table of Contents
Advertisement
IMPORTANT: Never operate the starter for more than 10
seconds at a time. If the engine fails to start, return the
key switch to the OFF position. Wait for more than 2
minutes, then try again.
Failure to do so may cause damage to the starter and/
or discharge the batteries.
6. Turn key switch (2) to the START position to rotate the
starter. The engine will start.
Do not depress accelerator pedal (3) when starting the
engine.
7. Release the key switch just after the engine has started.
The key switch will automatically return to the ON
position.
After the engine starts, perform idling operation
without depressing accelerator pedal (3) to warm up the
machine.
IMPORTANT: Right after the engine starts, the engine
speed will be kept to slow idle speed for maximum
30 seconds when the coolant, hydraulic oil or
transmission oil temperature is low, or for 3 seconds
at normal temperature even if accelerator pedal (3) is
operated.
d
WARNING: After starting the engine, start the
machine operation only after confirming that the
engine speed changes by operating accelerator pedal
(3).
Otherwise, the machine or the front attachment may
unexpectedly start moving, possibly causing accidents
such as crash.
f
NOTE:
If the machine is equipped with the emergency steering, the
emergency steering auto-check sound may be heard after
starting the engine.
White smoke may be emitted for several minutes after the
engine starts, this is not a malfunction.
OPERATING ENGINE
3-6
2
MNDB-01-053
3
MNEC-01-036
Advertisement
Table of Contents
