Inspection/Maintenance Side Access Cover - Hitachi ZW 310-6 Operator's Manual

Wheel loader

Hide thumbs Also See for ZW 310-6:

Table of Contents

Inspection/Maintenance Side Access Cover

 Always close side covers (1) during driving and

 Do not keep side covers (1) open on a slope or when

a strong wind is blowing. Failure to do so may be

dangerous because side cover (1) may unexpectedly

 Take care not to pinch your fingers when opening/

closing the side covers (1).

 When side cover (1) is opened, the cover may move

suddenly. Be careful not to come in contact with the

 Before inspecting around the engine, be sure to

secure side cover (1) with holding rod (3).

 If the machine is equipped with the fenders (2) on

side covers (1), never ride on the fenders (2).

When opening side cover (1), pull latch (4).

NOTE: When required to inspect the machine for a long time

with side cover (1) kept open, lock side cover (1) using the

holding rod (3) provided inside the side cover.

Side cover (1) has a holding groove. Engage the holding rod

(3) in the holding groove beforehand.

OPERATOR'S STATION

90Z7B-1-136-4EU

90Z7B-1-136-2EU

90Z7B-1-136-3EU

90Z7B-1-140-2EU