Controller Part Name And Function - Hitachi ZW 310-6 Operator's Manual

Controller Part Name and Function

Mode/Temperature Control Switch
 Mode Switch (3)
Selects the air vent. The selected air vent is indicated on
monitor (1).
: Front Vent Mode
: Front/Rear Vent Mode
: Front/Rear/Foot Vent Mode
: Foot Vent Mode
: Foot/Defroster Vent Mode
: Defroster Vent Mode
Each time mode switch (3) is pressed, the vent location can be
changed in 6 stages as illustrated below.
AUTO  
Press defroster switch (4) to change defroster
mode.
 AUTO mode
The air vent location is automatically selected.
 Temperature Control Switch (3):
Sets temperature in the cab.
Temperature in the cab can be set between 18.0 and 32.0 °C
by rotating temperature control switch (3).Temperature can
be set in 0.5 °C increments.
The set-temperature is displayed on monitor (1).
OPERATOR'S STATION
 
vent
1-115
3
4
MNEC-01-006
1
MNEK-01-103EN