Check Axle Oil Level - Hitachi ZW 310-6 Operator's Manual

Wheel loader

Hide thumbs Also See for ZW 310-6:

Table of Contents

Check Axle Oil Level

--- every 250 hours

1. Park the machine following the same procedures as

described on page 7-8 for preparation of inspection/

maintenance work. Run the engine at slow idle speed for

several minutes, then stop the engine.

2. Install articulation lock bar (1) to the front and rear of the

frame by following the procedures described on page

3. Clean the vicinity of oil level plug (2).

4. Remove oil level plug (2). Clean the tip of dipstick (3)

connected to oil level plug (2) with a clean cloth.

5. Make the plug lower surface contact to the axle seat

face. Oil level must be between marks H and L (4) on the

dipstick (3).

If necessary, add oil.

OTHER ATTACHMENTS

Axle Oil Cooler