Customised Settings; Meanings Of Settings; Lka Sensitivity; Lka Strength - Maserati Levante 2019 Owner's Manual

disabled by the system in order to
minimize the risks.
Speed Range of Use
Speed km/h (mph)
Minimum 60 (37)
Engaged/activated 60 (37)
Maximum 180 (112)

Customised Settings

LKA is configurable by the customer
in order to maximize its efficiency
based on the driver driving style
and his expectation of the system,
reducing at the same time the possible
invasiveness.
Entering "Controls" page on MTC+
display the driver can see the current
setting beside the "Lane Keeping
Assist" soft-key.
Touching "Lane Keeping Assist" soft-
key can disable or enable the system.
Touching the soft-key on the side the
driver can change the setting.
Driver warnings can be only "Visual"
or "Visual & Haptic" (default mode).
System response can be set to "Early",
"Medium" (default mode) or "Late".
System reaction force can be set to
"Low", "Medium" (default mode) or
"High".

Meanings of Settings

• "Visual" only: the system will not
request any steering torque/vibration
to correct the car trajectory. The
system will only show on the TFT
display when the vehicle is passing
the lane.
• "Visual & Haptic": the system will
apply steering torque when lane
departure is detected showing at
the same time the proper cluster
indication, adding to this steering
vibration when the departure is very
imminent.
When "Visual & Haptic" is selected
and of course LKA is enabled then two
following menu will be used by the
system.
• "LKA Sensitivity": it tunes the
distance to the lane boundary
interested where the system will start
to apply steering torque.
• "LKA Strength": it tunes the steering
torque value increasing or decreasing
it to have a stronger or weaker
trajectory correction/deviation.
Driving
5
297