Table of Contents
Advertisement
(Neutral) and P (Park) position by using
the surround view camera delay menu.
For further information, see "MTC+
Settings" in section "Dashboard
Instruments and Controls".
WARNING!
Failure to follow the precautions
below might result in serious injury or
even death.
•
Drivers must be careful during
manoeuvres also when using the
camera system with surround view.
•
Always check carefully the areas
around your vehicle, before
proceeding forward or backward.
•
Be sure to always check for any
pedestrians, animals, other vehicles,
obstructions, or blind spots.
•
The driver must use the utmost
caution while using the system
to avoid damage to property or
personal injury.
•
The camera system with surround
view is designed for use during
the day or under good lighting
conditions. Do not use and rely on
the system under poor lighting
conditions.
•
Distance lines and trajectory lines
must be used only as a reference
and only when vehicle is on a flat
ground. The distance shown on
MTC+ display must be interpreted as
a reference and might be different
from the distance actually present
between the vehicle and any
displayed objects.
•
Any obstacles present above the
cameras cannot be detected.
CAUTION!
•
To avoid vehicle damage, the camera
system with surround view should
only be used as a parking aid, as the
cameras are unable to view every
obstacle or object in your drive path.
•
To avoid vehicle damage, the vehicle
must be driven slowly when using the
camera system with surround view,
to be able to stop in time when an
obstacle is seen. It is recommended
Before Starting
that the driver looks frequently over
his/her shoulder when using this
system.
NOTE:
If snow, ice, mud, or any other
substance builds up on the camera
lens, clean the lens, rinse with water,
and dry with a soft cloth. Do not cover
the lens.
2
83
Advertisement
Table of Contents
