Maserati Levante 2019 Owner's Manual page 231

Start&Stop enabled is the default
status.
When the Start&Stop function is
turn off in the all following ways, in
addition to the related message the
amber indicator indicated in the
picture will turn on.
• Use the controls located on the
right side of the steering wheel (see
instructions in chapter "Instrument
Cluster" in section "Dashboard
Instruments and Controls") and select
"Start&Stop" main menu item which
displays the status of the function.
• Hold the switch ( ) to change the
status of the function.
It is possible to disable the Start&Stop
via the MTC+ in the following ways.
NOTE:
The highlighted soft-key indicates the
disabled status of Start&Stop system
and vice versa.
• Touch the "S&S Off" soft-key on the
main menu bar.
Or:
• Touch the "Controls" soft-key on the
(Apps) page of MTC+ display.
• Touch the "Start&Stop Off" soft-key
to disable the function.
Without ADAS
Touch a second time the same soft-key
to re-enable the function.
If the driving conditions allow it, the
user can re-enable the Start&Stop
function at any time using one of
previous ways.
(Continued)
Driving
5
231