Fog Lights; Automatic High Beams/Glare Free High Beams Failure - Maserati Levante 2019 Owner's Manual

Table of Contents

Advertisement

Understanding the Vehicle
The green indicator indicates that the
"Auto High Beam Assist" feature is
activated on MTC+; the blue indicator
indicates that all or only some high
beam LEDs are physically on in that
moment.
When instead there is the needing
to switch off the whole high beam
module to obtain the no glaring
3
effect, on the instrument cluster there
will be just one indicator on: the green
one.
When the scenario allows the partial
or full use of high beam with no
glaring disturbance, the blue indicator
will appear again.
NOTE:
• Some unpredictable conditions,
such as dirt, dust, film or any
other obstruction on camera lens
zone events could affect "Glare
116
Free" feature making it working
improperly.
• Heavy rainy and foggy weather could
affect system performance, leaving
the full beam switched on for longer
time than the nominal working
condition. This could cause a glaring
disturbance for other vehicles, to
avoid this the driver has to switch off
the high beam manually.
• In phase of disengagement of the
feature, the minimum operating
speed is 25 km/h (15.5 mph).
• "Glare Free" feature proper
operation is guaranteed if vehicle
speed is less than, or at least equal to
250 km/h (155 mph).
Automatic High Beams/Glare Free
High Beams Failure
In the event of a failure on high beam
system (Automatic or Glare Free
equipped, as well), the related amber
warning light will light up on the TFT
display.
Take your vehicle to the nearest
Center of the Service Network as soon
as possible avoiding to use this system.

Fog Lights

NOTE:
The front fog lights can only be
switched on if the position lights
are switched on. It is possible to turn
on the rear fog lights
only if the
low beam lights or the front fog lights
are on.
The front and rear fog lights switch is
built into the light switch.
The front and rear fog lights turn on
and off in the following order:
• press the lights switch once to turn
on the front fog lights;
• press the light switch a second time
to turn on the rear fog lights (front
fog lights will stay on);
• from this condition, press the light
switch again to turn off the rear fog
lights (front fog lights will stay on);

Advertisement

Table of Contents
loading

Table of Contents